KA3VSP > ALL 30.03.25 12:30z 19 Lines 636 Bytes #94 (0) @ WW BID : 46108_KA3VSP Subj: re: Hardware for new node Path: ED1ZAC<ED1ZAC<LU4ECL<LU9DCE<GB7YEW<WA3WLH<W9GM<KA3BVJ<KA3VSP Sent: 250330/1222Z 46108@KA3VSP.DE.USA.NOAM BPQ6.0.24 Hi Eric. Is the site remote or would you have access? If remote, I'd recommend Kantronics KPC-3 hardware TNC's with K-Net and DB-25 RS-232 ports where the TNC's for each port can be daisy chained. The hardware TNC's can be accessed remotely over RF for any changes. K-NET works well as a NetROM compatible. If you have access, I'd probably recommend a Raspberry Pi with BPQ and a hardware KISS TNC such as NinoTNC's or KPC-3's. For soundmodems, I'd recommend UZ7HO, only because I had problems with Direwolf and it left a bad experience for me. But, that was years ago and Direwolf may be an OK solution now. Best, Brian, KA3VSP
Read previous mail | Read next mail