VK1KW  > APRS     05.02.26 11:00l 13 Lines 524 Bytes #999 (0) @ WW
BID : 33341_VK1KW
Subj: JNOS2Q no TX pos data
Path: ED1ZAC<ED1ZAC<DB0APK<DK0WUE<ZL2BAU<VK1KW
Sent: 260205/1117Z @:VK1KW.ACT.AUS.OC #:33341 [Canberra, QF44] FBB7.00i
From: VK1KW@VK1KW.ACT.AUS.OC
To  : APRS@WW

Hello JNOS users,
I have not been able to send APRS position data on my RF port called TRK.
The TRK port receives APRS RF position data ok but my beacon is not sent.
I note in the published config part in autoexec.nos the RFPOS command is not
used instead someone is using AX25 BCTXT to do the job.
RFPOS cmd is still listed under jnos "aprs bc ?" list.

Has there been an update to fix this problem please?
also what does the character between the N/W position values indicate?


Read previous mail | Read next mail