OpenBCM V1.06 (Linux)

Packet Radio Mailbox

ED1ZAC

[C.D.G. OpenBCM]

 Login: GUEST





  
CX2SA  > SATDIG   09.02.19 20:15l 845 Lines 28454 Bytes #3 (0) @ WW
BID : AMSATBB1455
Read: GUEST
Subj: AMSAT-BB-digest V14 55
Path: ED1ZAC<ED1ZAC<CX2SA
Sent: 190209/1900Z @:CX2SA.SAL.URY.SOAM #:65247 [Salto] FBB7.00e $:AMSATBB1455
From: CX2SA@CX2SA.SAL.URY.SOAM
To  : SATDIG@WW

Today's Topics:

   1. Re: New Telemetry Decoder for FalconSat-3 (Graham)
   2. Re: New Telemetry Decoder for FalconSat-3 (Chris Thompson)
   3. ISS SSTV (Alex Brown)
   4. Re: ISS SSTV (Mark L. Hammond)
   5. Re US IC-9700 prices announced (David G0MRF)
   6. Re: New Telemetry Decoder for FalconSat-3 (Corey Shields)
   7. ISS-SSTV (alex weimer)
   8. Re: ISS-SSTV (skristof@???????.????
   9. Re: ISS-SSTV (Roy Dean)
  10. ISS SSTV around 1710 UTC Saturday
      (Patrick STODDARD (WD9EWK/VA7EWK))
  11. Re: New Telemetry Decoder for FalconSat-3 (Graham)
  12. Re: ISS-SSTV (skristof@???????.????
  13. Re: ISS-SSTV (Tom Matthews)
  14. Re: ISS-SSTV (Parker, Ron)


----------------------------------------------------------------------

Message: 1
Date: Sat, 9 Feb 2019 14:15:22 +0000
From: Graham <planophore@???.??>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] New Telemetry Decoder for FalconSat-3
Message-ID: <d06c2d01-f928-a122-665d-0c63b2378219@???.??>
Content-Type: text/plain; charset=utf-8; format=flowed

Chris,

thank for posting this and all your work.

I monitored an early morning pass at my location (around 2019-02-09
12:56) and noted good signal strength.

I am using a simple 70cm turnstile with mast mounted pre-amp, airspy
mini, and SDR#.

Also, using high speed HS soundmodem configured for G3RUH 9600 baud all
configured following the description in the pacsat ground manual document.

SDR# has audio filtering turned off as I do for use with the FOX sat?
programs.

So far, no decodes.

So, my primary question as this point is - what mode should the radio
bet set to?? NFM? WFM? USB?? Bandwidth?? I am currently set to 15kHz
bandwidth.

I automatically correct for doppler.

cheers, Graham ve3gtc


On 2019-02-08 22:53:33, Chris Thompson wrote:
> I've written a new Ground station for FalconSat-3. If you had an initial go
> with WISP without success or if you have never tried to decode FalconSat-3,
> now is a good time to try.  This requires much less setup than WISP.  And
> don't be put off if you don't have a hardware TNC, this will work with a
> soundcard TNC. Or, if you didn't try to listen to FalconSat-3 because you
> don't have a station that can transmit commands to the spacecraft, then
> read on. We still need your help to decode telemetry.
>
> In particular we would like to encourage people to download the Telemetry
> and forward it to an AMSAT telemetry server.  Currently more telemetry is
> generated than we can download with AMSAT Operations ground stations.
> Receive only stations can contribute to that as well as stations equipped
> to transmit to FalconSat-3 and request files.  You can see telemetry
> uploaded so far here: http://tlm.amsatfox.org/tlm/FalconSat-3
>
> There are details about the spacecraft, how to install the software and how
> it works in the manual available if you download the software or online
> here: http://www.g0kla.com/pacsat/pacsat_ground_manual.pdf
>
> You can download the software at www.g0kla.com/pacsat/index.php.  I have
> also written some blog posts and thoughts about the software for anyone
> interested.  They are linked from the download page.
>
> There is much to do here of course and most of it probably won't get done.
> I would call this a beta release.  If you have suggestions or bug fixes
> please log them online at https://github.com/ac2cz/Falcon/issues or send me
> an email.
>
> The software is open source.  All the details are here:
> https://github.com/ac2cz/Falcon/  The telemetry processing and display
> leverages common code from FoxTelem in a library here:
> https://github.com/ac2cz/libTelem/
>
>
>


------------------------------

Message: 2
Date: Sat, 9 Feb 2019 09:30:24 -0500
From: Chris Thompson <g0kla@????.???>
To: Graham <planophore@???.??>
Cc: AMSAT <amsat-bb@?????.???>
Subject: Re: [amsat-bb] New Telemetry Decoder for FalconSat-3
Message-ID:
<CAJOf0+sS9ju0qmRCNbt_BcN_CoAfjwsgcK4Pb+ZsKhPTBqgZsg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"

Graham,

The data is Frequency Shift Keying - FSK - so set the sdr to NFM.  15kHz
wide seems reasonable to start with.

You should see bytes decoded in hs_soundmodem.  If that is working, but the
ground station is not decoding then make sure you have the TCP connection
setup correctly.

Chris

On Sat, Feb 9, 2019 at 9:16 AM Graham <planophore@???.??> wrote:

> Chris,
>
> thank for posting this and all your work.
>
> I monitored an early morning pass at my location (around 2019-02-09
> 12:56) and noted good signal strength.
>
> I am using a simple 70cm turnstile with mast mounted pre-amp, airspy
> mini, and SDR#.
>
> Also, using high speed HS soundmodem configured for G3RUH 9600 baud all
> configured following the description in the pacsat ground manual document.
>
> SDR# has audio filtering turned off as I do for use with the FOX sat
> programs.
>
> So far, no decodes.
>
> So, my primary question as this point is - what mode should the radio
> bet set to?  NFM? WFM? USB?  Bandwidth?  I am currently set to 15kHz
> bandwidth.
>
> I automatically correct for doppler.
>
> cheers, Graham ve3gtc
>
>
> On 2019-02-08 22:53:33, Chris Thompson wrote:
> > I've written a new Ground station for FalconSat-3. If you had an initial
> go
> > with WISP without success or if you have never tried to decode
> FalconSat-3,
> > now is a good time to try.  This requires much less setup than WISP.  And
> > don't be put off if you don't have a hardware TNC, this will work with a
> > soundcard TNC. Or, if you didn't try to listen to FalconSat-3 because you
> > don't have a station that can transmit commands to the spacecraft, then
> > read on. We still need your help to decode telemetry.
> >
> > In particular we would like to encourage people to download the Telemetry
> > and forward it to an AMSAT telemetry server.  Currently more telemetry is
> > generated than we can download with AMSAT Operations ground stations.
> > Receive only stations can contribute to that as well as stations equipped
> > to transmit to FalconSat-3 and request files.  You can see telemetry
> > uploaded so far here: http://tlm.amsatfox.org/tlm/FalconSat-3
> >
> > There are details about the spacecraft, how to install the software and
> how
> > it works in the manual available if you download the software or online
> > here: http://www.g0kla.com/pacsat/pacsat_ground_manual.pdf
> >
> > You can download the software at www.g0kla.com/pacsat/index.php.  I have
> > also written some blog posts and thoughts about the software for anyone
> > interested.  They are linked from the download page.
> >
> > There is much to do here of course and most of it probably won't get
> done.
> > I would call this a beta release.  If you have suggestions or bug fixes
> > please log them online at https://github.com/ac2cz/Falcon/issues or
> send me
> > an email.
> >
> > The software is open source.  All the details are here:
> > https://github.com/ac2cz/Falcon/  The telemetry processing and display
> > leverages common code from FoxTelem in a library here:
> > https://github.com/ac2cz/libTelem/
> >
> >
> >
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>


--
Chris E. Thompson
chrisethompson@?????.???
g0kla@????.???


------------------------------

Message: 3
Date: Sat, 9 Feb 2019 15:11:26 +0000
From: Alex Brown <gw7eri.lists@?????.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] ISS SSTV
Message-ID:
<CADoPODY_KDjCR4_dPPMdG-+tp4gkODhPLuW=XZJUQ+0ZH1HNXQ@????.?????.???>
Content-Type: text/plain; charset="UTF-8"

Whatever the problem was it seems to be fixed now! Two great quality images
copied on the 1417 to 1424 pass this afternoon. Max elevation in IO81qp 79
degrees.

Alex
GW7ERI


------------------------------

Message: 4
Date: Sat, 9 Feb 2019 11:06:42 -0500
From: "Mark L. Hammond" <marklhammond@?????.???>
To: Alex Brown <gw7eri.lists@?????.???>
Cc: amsat-bb@?????.???
Subject: Re: [amsat-bb] ISS SSTV
Message-ID:
<CAPRXzyoY+KYv_ePhXUWtUUZL0xn6w7QBVNi+hpJK0kmVT9Uj4g@????.?????.???>
Content-Type: text/plain; charset="UTF-8"

Agreed. S9+60 here just now.

Mark N8MH

On Sat, Feb 9, 2019 at 10:21 AM Alex Brown <gw7eri.lists@?????.???> wrote:

> Whatever the problem was it seems to be fixed now! Two great quality images
> copied on the 1417 to 1424 pass this afternoon. Max elevation in IO81qp 79
> degrees.
>
> Alex
> GW7ERI
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>
--
Mark L. Hammond [N8MH]


------------------------------

Message: 5
Date: Sat, 9 Feb 2019 16:58:18 +0000 (UTC)
From: David G0MRF <g0mrf@???.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] Re US IC-9700 prices announced
Message-ID: <1445800310.898981.1549731498602@????.?????.???>
Content-Type: text/plain; charset=UTF-8

Hi Alan.



Seems on par with the UK.



Here in the UK the price is ?1795. (probably the maximum they can get away
with at the moment)

To compare that figure you need to remove our outrageous local 20% tax.



which is about  ?1496 + 20%



So allowing about $1.30 to the UK Pound  gives a US equivalent price of   
$1945 + your local taxes.



Eventually, just under 2k Dollars looks about right.

Could be a good reason to come to Washington this October......



73



David





Per reports from HamCation, MSRP is $2195.  HRO, GigaParts, and
DXEngineering are listing them for $2095 for delivery 2Q.

73,

Alan
WA4SCA

------------------------------

Message: 6
Date: Sat, 9 Feb 2019 12:19:40 -0500
From: Corey Shields <cshields@?????.???>
To: Chris Thompson <g0kla@????.???>
Cc: AMSAT <AMSAT-BB@?????.???>
Subject: Re: [amsat-bb] New Telemetry Decoder for FalconSat-3
Message-ID:
<CANnv5mZr1HFY6dJnhmOTFvtTV0ySe0kSxXiSnXSCgF_y6jFNFg@????.?????.???>
Content-Type: text/plain; charset="UTF-8"

Hi Chris, we spoke at the symposium about sharing data..

The best way to pull data would be to periodically pull from the api for
db.satnogs.org, however its not working at the moment[1]. I've got some
free time this weekend, I'll see if I can get this fixed.

That said, we have been decoding the messages we have from falconsat-3 into
our dashboard[2] going back to April. Its just running through a message
decoder, no telemetry. It shouldn't be too hard to write a struct for the
telemetry, and re-decode the frames so we can make use of the rest of the
data.

I'll reach out directly once the API is fixed..

Cheers,
-Corey  KB9JHU

[1] - https://gitlab.com/librespacefoundation/satnogs/satnogs-db/issues/266
[2] -
https://dashboard.satnogs.org/d/UZ30F5Xik/ax-25-monitor?refresh=1m&orgId=1



On Fri, Feb 8, 2019 at 7:49 PM Chris Thompson <g0kla@????.???> wrote:

> I'm not aware of that data or how to access it.  If there is an archive of
> data and it includes the WE files then it might be useful to us.
>
> 73
> Chris
>
> On Fri, Feb 8, 2019 at 6:25 PM Scott <scott23192@?????.???> wrote:
>
> > That's great, Chris!  Thanks for all the work on that project.
> >
> > Regarding telemetry, does AMSAT access the data that is forwarded to
> > SatNogs?
> >
> > Ever since FalconSat-3 was turned over to the Amateur Community, along
> > with
> > I'm sure a lot of others, I have forwarded thousands of telemetry packets
> > from FalconSat-3 to the SatNogs database using the DK3WN Telemetry
> > Forwarder
> > ( http://www.dk3wn.info/files/tlm_forwarder2.zip ).
> >
> > Now, I don't know HOW to access data that is forwarded to SatNogs in that
> > way, but a lot of data is aggregated there from many of the past &
> > presently
> > active satellites that have known decoders.   I'm aware that Univ.
> > Colorado
> > / Boulder obtains data from the CSIM satellite that way; I would imagine
> > others do as well.
> >
> > Thanks again for what I'm sure was a huge job on the new software!
> >
> > -Scott,  K4KDR
> >
> > =========================================
> >
> > -----Original Message-----
> > From: Chris Thompson
> > Sent: Friday, February 08, 2019 5:53 PM
> > To: AMSAT
> > Subject: [amsat-bb] New Telemetry Decoder for FalconSat-3
> >
> > I've written a new Ground station for FalconSat-3. If you had an initial
> go
> > with WISP without success or if you have never tried to decode
> FalconSat-3,
> > now is a good time to try.  This requires much less setup than WISP.  And
> > don't be put off if you don't have a hardware TNC, this will work with a
> > soundcard TNC. Or, if you didn't try to listen to FalconSat-3 because you
> > don't have a station that can transmit commands to the spacecraft, then
> > read on. We still need your help to decode telemetry.
> >
> > In particular we would like to encourage people to download the Telemetry
> > and forward it to an AMSAT telemetry server.  Currently more telemetry is
> > generated than we can download with AMSAT Operations ground stations.
> > Receive only stations can contribute to that as well as stations equipped
> > to transmit to FalconSat-3 and request files.  You can see telemetry
> > uploaded so far here: http://tlm.amsatfox.org/tlm/FalconSat-3
> >
> > There are details about the spacecraft, how to install the software and
> how
> > it works in the manual available if you download the software or online
> > here: http://www.g0kla.com/pacsat/pacsat_ground_manual.pdf
> >
> > You can download the software at www.g0kla.com/pacsat/index.php.  I have
> > also written some blog posts and thoughts about the software for anyone
> > interested.  They are linked from the download page.
> >
> > There is much to do here of course and most of it probably won't get
> done.
> > I would call this a beta release.  If you have suggestions or bug fixes
> > please log them online at https://github.com/ac2cz/Falcon/issues or send
> > me
> > an email.
> >
> > The software is open source.  All the details are here:
> > https://github.com/ac2cz/Falcon/  The telemetry processing and display
> > leverages common code from FoxTelem in a library here:
> > https://github.com/ac2cz/libTelem/
> >
> >
> >
> > --
> > Chris E. Thompson
> > chrisethompson@?????.???
> > g0kla@????.???
> >
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions
> > expressed
> > are solely those of the author, and do not reflect the official views of
> > AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> >
>
>
> --
> Chris E. Thompson
> chrisethompson@?????.???
> g0kla@????.???
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>


--
Corey Shields


------------------------------

Message: 7
Date: Sat, 9 Feb 2019 12:19:51 -0500 (EST)
From: alex weimer <ingejack@???.???>
To: amsat-bb@?????.???
Subject: [amsat-bb] ISS-SSTV
Message-ID: <1172179347.7573.1549732791420@???????.???.???>
Content-Type: text/plain; charset=UTF-8

Great resolution even at 10 degree pass    2 pictures  at 1810Z


------------------------------

Message: 8
Date: Sat, 09 Feb 2019 12:27:54 -0500
From: skristof@???????.???
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] ISS-SSTV
Message-ID: <267114d33727ad9a8add3db732f8e093@???????.???>
Content-Type: text/plain; charset=US-ASCII

Got a picture on the 1911 UTC pass in EM79ji.

Steve AI9IN

On 2019-02-09 12:19, alex weimer wrote:

> Great resolution even at 10 degree pass    2 pictures  at 1810Z
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

------------------------------

Message: 9
Date: Sat, 9 Feb 2019 12:38:09 -0500
From: Roy Dean <royldean@?????.???>
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] ISS-SSTV
Message-ID:
<CADGPg2vYkndJ5_qZDBSR5kbT_O3+fjjB2sj3Z-c4Cj3HQ13g+Q@????.?????.???>
Content-Type: text/plain; charset="UTF-8"

Do you guys have your times correct?   The email below was sent at 17:36z.

--Roy
K3RLD


> Got a picture on the 1911 UTC pass in EM79ji. Steve AI9IN On 2019-02-09
> 12:19, alex weimer wrote: > Great resolution even at 10 degree pass 2
> pictures at 1810Z > _______________________________________________ > Sent
> via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available > to
> all interested persons worldwide without requiring membership. Opinions
> expressed > are solely those of the author, and do not reflect the official
> views of AMSAT-NA. > Not an AMSAT-NA member? Join now to support the
> amateur satellite program! > Subscription settings:
> http://www.amsat.org/mailman/listinfo/amsat-bb


------------------------------

Message: 10
Date: Sat, 9 Feb 2019 17:49:07 +0000
From: "Patrick STODDARD (WD9EWK/VA7EWK)" <amsat-bb@??????.???>
To: AMSAT <amsat-bb@?????.???>
Subject: [amsat-bb] ISS SSTV around 1710 UTC Saturday
Message-ID:
<CAN6TEUdX4n3NXt0fy8v5PTJAm=s_4UnotDNYvwzMdHDEL7d0-Q@????.?????.???>
Content-Type: text/plain; charset="UTF-8"

Hi!

During the last ISS pass over central Arizona at 1710 UTC, I
copied a part of one picture starting about 15 seconds after
AOS, followed by a clean and complete picture a couple of
minutes later. This was during a 9.5-degree pass over central
Arizona. Signal strength was more like I remember from past
SSTV events, even when the ISS elevation was below 1 degree.
A pass like this would have been impossible to hear yesterday.
You can see these pictures at:

https://twitter.com/WD9EWK/status/1094287865637269505 (1710 UTC pic)

https://twitter.com/WD9EWK/status/1094288150329847808 (1712 UTC pic)

Both were recorded by my TH-D74 with an Elk log periodic, and
then decoded using RX-SSTV on a Windows 7 laptop.

73!



Patrick WD9EWK/VA7EWK
http://www.wd9ewk.net/
Twitter: @?????? or http://twitter.com/WD9EWK


------------------------------

Message: 11
Date: Sat, 9 Feb 2019 17:57:14 +0000
From: Graham <planophore@???.??>
To: Chris Thompson <g0kla@????.???>
Cc: AMSAT <amsat-bb@?????.???>
Subject: Re: [amsat-bb] New Telemetry Decoder for FalconSat-3
Message-ID: <aec33757-25cd-d220-996b-2c6d1aaf29ec@???.??>
Content-Type: text/plain; charset=utf-8; format=flowed

thank you everyone for your suggestions.

I followed a couple more passes and it seems that I just don't have
sufficient signal level - enough to clearly see and track the signal
that would be good enough for the UK funcube signals but not enough for 9k6.

Other than that the decoding software and hs-soundmodem all work well
together.

I took a look at the passes I would see and I get only one per day where
the highest elevation gets as high as 17 degrees, the remainder are all
12 degrees or less.

I have a dual band vertical mounted at roof top level and I may give
that a try but unfortunately it doesn't have a mast head pre-amp but I
can put a pre-amp in line near the radio which may help.

too much snow on the ground and on the roof; it will be a couple of
months before I can get to any real antenna work.

cheers, Graham ve3gtc


On 2019-02-09 14:30:24, Chris Thompson wrote:
> Graham,
>
> The data is Frequency Shift Keying - FSK - so set the sdr to NFM.?
> 15kHz wide seems reasonable to start with.
>
> You should see bytes decoded in hs_soundmodem.? If that is working,
> but the ground station is not decoding then make sure you have the TCP
> connection setup correctly.
>
> Chris
>


------------------------------

Message: 12
Date: Sat, 09 Feb 2019 13:09:10 -0500
From: skristof@???????.???
To: amsat-bb@?????.???
Subject: Re: [amsat-bb] ISS-SSTV
Message-ID: <31d1bb69ab396522f33257a819bcea99@???????.???>
Content-Type: text/plain; charset=US-ASCII

Good catch, Roy! Mine was, in fact, the 1711 UTC pass in EM79ji. Senior
moment.

Steve AI9IN

On 2019-02-09 12:38, Roy Dean wrote:

> Do you guys have your times correct?   The email below was sent at 17:36z.
>
> --Roy
> K3RLD
>
>> Got a picture on the 1911 UTC pass in EM79ji. Steve AI9IN On 2019-02-09
>> 12:19, alex weimer wrote: > Great resolution even at 10 degree pass 2
>> pictures at 1810Z > _______________________________________________ > Sent
>> via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available > to
>> all interested persons worldwide without requiring membership. Opinions
>> expressed > are solely those of the author, and do not reflect the official
>> views of AMSAT-NA. > Not an AMSAT-NA member? Join now to support the
>> amateur satellite program! > Subscription settings:
>> http://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb

------------------------------

Message: 13
Date: Sat, 9 Feb 2019 12:23:23 -0600
From: Tom Matthews <k5saf.tx@?????.???>
To: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] ISS-SSTV
Message-ID:
<CAOD_qbXhZqE=RdA7aDP=6N1g42s7gxJHhc2Jb6MabMJnt4QYGA@????.?????.???>
Content-Type: text/plain; charset="UTF-8"

Echoing others - Got 2 great images 4/12 & 5/12 in EL29GT with TH-D72A and
long whip,

73,
Tom K5SAF

On Sat, Feb 9, 2019 at 12:11 PM <skristof@???????.???> wrote:

> Good catch, Roy! Mine was, in fact, the 1711 UTC pass in EM79ji. Senior
> moment.
>
> Steve AI9IN
>
> On 2019-02-09 12:38, Roy Dean wrote:
>
> > Do you guys have your times correct?   The email below was sent at
> 17:36z.
> >
> > --Roy
> > K3RLD
> >
> >> Got a picture on the 1911 UTC pass in EM79ji. Steve AI9IN On 2019-02-09
> >> 12:19, alex weimer wrote: > Great resolution even at 10 degree pass 2
> >> pictures at 1810Z > _______________________________________________ >
> Sent
> >> via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available >
> to
> >> all interested persons worldwide without requiring membership. Opinions
> >> expressed > are solely those of the author, and do not reflect the
> official
> >> views of AMSAT-NA. > Not an AMSAT-NA member? Join now to support the
> >> amateur satellite program! > Subscription settings:
> >> http://www.amsat.org/mailman/listinfo/amsat-bb
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions expressed
> > are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>


--
Tom K5SAF


------------------------------

Message: 14
Date: Sat, 9 Feb 2019 18:42:36 +0000
From: "Parker, Ron" <Ron.Parker@??????????.???>
To: AMSAT BB <amsat-bb@?????.???>
Subject: Re: [amsat-bb] ISS-SSTV
Message-ID:
<dbf8cf16460646e0b06f6e14631837da@?????????.??????????.??.??.??>
Content-Type: text/plain; charset="us-ascii"

I did not hear anything on this last pass here in EL29GA at around 1832?
GP-3 vertical on roof going to my SDRPlay. I have a huge noise on 145.804
full scale that I'm trying to track down but I didn't see anything in the
waterfall at all on 148.800.

--
Ron Parker, KR5P


-----Original Message-----
From: AMSAT-BB [mailto:amsat-bb-bounces@?????.???? On Behalf Of Tom Matthews
Sent: Saturday, February 09, 2019 12:23 PM
To: AMSAT BB
Subject: Re: [amsat-bb] ISS-SSTV

Echoing others - Got 2 great images 4/12 & 5/12 in EL29GT with TH-D72A and
long whip,

73,
Tom K5SAF

On Sat, Feb 9, 2019 at 12:11 PM <skristof@???????.???> wrote:

> Good catch, Roy! Mine was, in fact, the 1711 UTC pass in EM79ji. Senior
> moment.
>
> Steve AI9IN
>
> On 2019-02-09 12:38, Roy Dean wrote:
>
> > Do you guys have your times correct?   The email below was sent at
> 17:36z.
> >
> > --Roy
> > K3RLD
> >
> >> Got a picture on the 1911 UTC pass in EM79ji. Steve AI9IN On 2019-02-09
> >> 12:19, alex weimer wrote: > Great resolution even at 10 degree pass 2
> >> pictures at 1810Z > _______________________________________________ >
> Sent
> >> via AMSAT-BB at amsat.org. AMSAT-NA makes this open forum available >
> to
> >> all interested persons worldwide without requiring membership. Opinions
> >> expressed > are solely those of the author, and do not reflect the
> official
> >> views of AMSAT-NA. > Not an AMSAT-NA member? Join now to support the
> >> amateur satellite program! > Subscription settings:
> >> http://www.amsat.org/mailman/listinfo/amsat-bb
> > _______________________________________________
> > Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> > to all interested persons worldwide without requiring membership.
> Opinions expressed
> > are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> > Not an AMSAT-NA member? Join now to support the amateur satellite
> program!
> > Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
> _______________________________________________
> Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>


--
Tom K5SAF
_______________________________________________
Sent via AMSAT-BB@?????.???. AMSAT-NA makes this open forum available
to all interested persons worldwide without requiring membership. Opinions
expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT-NA member? Join now to support the amateur satellite program!
Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


------------------------------

Subject: Digest Footer

_______________________________________________
Sent via amsat-bb@?????.???.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership.  Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb

------------------------------

End of AMSAT-BB Digest, Vol 14, Issue 55
****************************************


Read previous mail | Read next mail


 17.02.2019 01:21:43lGo Back Go up