OpenBCM V1.06 (Linux)

Packet Radio Mailbox

ED1ZAC

[C.D.G. OpenBCM]

 Login: GUEST





  

::::::::::::::::::
:: FLEXNET LINK ::
::::::::::::::::::
(only sysop)
LINK < ch | call | - > <call> [ # | $ | - | @ | > | ) | ! ]

The definition of link partners can be done with LINK command. You can also
define SSID for each link.

The single options are:
a) simple links without routing tests:
  "$" - no routing tests
  "#" - no routing tests; link entry is invisible for normal users
        (e.g. connection of terminal for service purpose)
b) links with routing tests:
  " " - no option: normal routing tests with exchange of routing
        information (default)
  "-" - link partner is only local defined and is not transmitted
        to other link partners, but the targets of subnet behind
        (neighbours) are exchanged to others (e.g. for test purpose)
  ">" - the link partner and all targets of subnet behind aren't
        transmitted to others (e.g. internal net)
  "!" - the link partner himself is transmitted to others, but
        targets of subnet behind not
  "@" - simple routing test for links to neighbours without flexnet
        routing protocol (e.g. TheNet digis)
  ")" - neighbour with subnet; link entry is invisible for normal
        user (=combination from ">" and "#")

Examples:  1) "link 2 db0dig"      : sets link partner DB0DIG to channel 2
           2) "link 6 df2vo-7 #"   : sets invisible test link
                                     DF2VO-7 to channel 6
           3) "link 15 db0hom-9 )" : sets invisible S&F-SSID "-9"
                                     for BBS DB0HOM to channel 15
           4) "link db0dig db0psc" : sets link DB0PSC via link DB0DIG

In difference to baycom node there can be more than one link defined to a call
on different ports.
To delete a link entry use LINK - <call>. Between flexnet partners normally no
SSID is defined, so the range from 0 to 15 can be used.

 18.06.2018 00:20:48lGo Back Go up