::::::::::::::::::: :: FLEXNET PARMS :: ::::::::::::::::::: (only sysop) PARMS <param> <..> <..> With PARMS command you can define txdelay and SSID of a channel. a) To setup txdelay at channel <port>: Syntax: P T <txdelay> <port> Range: 1...255 [ 10 msec steps ] Example: P T 12 3 means a txdelay of 120ms at port 3 b) To setup a SSID at channel <port>: Syntax: P S <ssid> [ port | 16 ] Range: must be in range of set MYCALL SSID range Example: P S 15 15 You can delete a defined SSID if you set it to (not existent) channel 16: P I <ssid> 16 If a channel has not a defined SSID, only connects of link partner are allows. For testing purpose it's better to define for each channel a SSID, and only delete SSID if port should have only one exclusive link.