:::::::::::::: :: REMERASE :: :::::::::::::: (only sysop, init.bcm) Syntax: REM(ERASE) [<n>] (default: 1) The command REMERASE defines if remote erases are possible and how they are handled. BCM and DPBox can exchange remote erase information. At BCM a remote erase can be done with "ERASE -F" command. There are following options: REMERASE 0 remote erase is disabled REMERASE 1 remote erase is enabled without any restrictions REMERASE 2 remote erase is only accepted, if mail was erased from same BBS where it was created REMERASE 3 remote erase is only accepted, if mail was erase from same BBS where it was accepted; mail is only purged after lifetime elapsed, so sysop has possiblity to unerase those mails You can list remote erased mails with "CHECK -R". If you set "REMERASE 3" and want to really erase those mails you have to do a "unerase <mail>" and then do a "erase <mail>" again.