:::::::::::::: :: WATCHDOG :: :::::::::::::: (only sysop, init.bcm) Syntax: WAT(CHDOG) [<n>] (default: 6) 0 watchdog is disabled 1 hardware watchdog enabled: pin 2 of lpt1 port use D0 with 10 Hz (only DOS) 2 software watchdog enabled: BCM watches himself and if a error is detected the watchdog is executed after 1 minute; if using oshell, the time is set to 30 min; if watchdog is executed, a cold reboot of pc is done 4 debug mode: before doing any watchdog reset, a syslog entries is tried to perform; this may cause the watchdog to stuck, because filesystem have to live (#A in file "trace/syslog.bcm"). You can calculate the single values, this means "watchdog 7" activates all possibilities. Sysops who want to have a stable software running and don't use a hardware watchdog should use "watchdog 2".